Redeye HC front brembos/rotors

[ChillxPoint]

SOLD

Lowered price


Selling my 2020 hellcat redeye front Brembo 6 piston brakes, pads and rotors from my 2020 Hellcat redeye. Brakes and rotors (15.4) have 2k miles on them with no damage. Here are some pictures. Once I clean the brembos i will post some clean pics of those.

Asking 1350.00 plus shipping

 

[BULL]

Can you get me an accurate thickness measurement on the rotors (with either digital mics or calipers)

Are these 390mm or 400mm in diameter?

Do the calipers have the white p/n stickers on the back of them? If so, pictures please.

How many, if any, passes at the strip?

 

[BULL]

Assuming your MY20 isn't a late build, these should be the 390mm dia.

 

[ChillxPoint]

Can you get me an accurate thickness measurement on the rotors (with either digital mics or calipers)

Are these 390mm or 400mm in diameter?

Do the calipers have the white p/n stickers on the back of them? If so, pictures please.

How many, if any, passes at the strip?

When i get home ill check for the measurements and part number. As for passes 0. I dont drive my cars hard. The pic is a more detailed spec of the rotors brakes. These came off of my 2020 hellcat redeye.

 

[BULL]

When i get home ill check for the measurements and part number. As for passes 0. I dont drive my cars hard. The pic is a more detailed spec of the rotors brakes. These came off of my 2020 hellcat redeye.

Why did they come off? I guess I assumed you are changing to the 4-pot brakes?

 

[ChillxPoint]

Why did they come off? I guess I assumed you are changing to the 4-pot brakes?

Yup have the demon SS wheels now

 

[ChillxPoint]

Assuming your MY20 isn't a late build, these should be the 390mm dia.

Yeah my car was built in late 2019. I bought it march 2020

 

[ChillxPoint]

I guess the 2021 models have different rotors then previous years. Mine is the 2020 ones for sure.

 

[BULL]

I'll check in later for updates, I'm interested in them if the rotors are the full ~34.5mm thickness * 390mm dia.

 

[ChillxPoint]

I'll check in later for updates, I'm interested in them if the rotors are the full ~34.5mm thickness * 390mm dia.

I feel stupid. What tool will i need to measure this? Im assuming a measuring tape wont work?

 

[Slowpoke387]

I feel stupid. What tool will i need to measure this? Im assuming a measuring tape wont work?

Micrometer

 

[SilverBillet]

Dial caliper should work. Diameter should be just under 15 3/8”

 

[BULL]

I feel stupid. What tool will i need to measure this? Im assuming a measuring tape wont work?

The diameter can easily be done with a tape measure. (it's either 390, or 400, and almost assuredly 390mm)

As for the thickness, either 2" micrometers (somewhat unusual) or 6" calipers.

 

[ChillxPoint]

The diameter can easily be done with a tape measure. (it's either 390, or 400, and almost assuredly 390mm)

As for the thickness, either 2" micrometers (somewhat unusual) or 6" calipers.

If i cant figure it out ill head to a shop tomorrow lol. Ill be home in 3 hours.

 

[ChillxPoint]

The diameter can easily be done with a tape measure. (it's either 390, or 400, and almost assuredly 390mm)

As for the thickness, either 2" micrometers (somewhat unusual) or 6" calipers.

Its definitely not 400mm. My measurements came out to apx 380mm.

 

[ChillxPoint]

Apx 2 in thickness

 

[ChillxPoint]

Sorry the caliper is dirty. Going to clean tomorrow. Here are some pics of the white stickers.

 

[ChillxPoint]

Here is the other caliper

 

[ChillxPoint]

Hope that's what you asked for?

 

[BULL]

Putting the diameter aside, it was the thickness of the rotors (with wear in mind) that I was asking for.




I'll send you a PM