3.17" Litens Hellraiser Pulley IN STOCK at HHP!

[moparjim]

You lucky ba#@&rd!

My car hasn't made any more boost in low DA vs high. I didn't see it stock, and I FOR SURE haven't seen it with the 2.72. I've run this 2.72 in 90 degree heat and 50 degree cool air and it makes 16.5psi no matter what. May not 100% answer the fueling question in DA changes, but at least from a boost perspective it should be the same based on my experience with data logging to back it up.

I was just going by what I have seen on the dash the few times I looked. Hot sweaty day in the summer I have never seen the gauge go over 10psi. In November
I have seen 12. Not scientific, just what I noticed on occasion.

And yes I'm lucky. But in a month +/- a week or 2. I will be without my cat till possibly the beginning of May.

 

[moparjim]

You lucky ba#@&rd! .

This is the DA at the moment. Should be pretty close to that when the track opens. Imagine later in the month.

 

[Hickster]

Ok, surprise me, in what country are we talking about???

 

[TeamDemon]

Ok, surprise me, in what country are we talking about???

That's in Canada, province of Quebec

 

[moparjim]

@Speedy! Just going to put this up for your entertainment. I know it will go up today. But it's a hell of a good place to start. LOL

 

[Magnified]

No body has one of these on their car with no tune and some logs?

 

[Markp]

No body has one of these on their car with no tune and some logs?

Hpindy Data logged my Redeye 100% stock only mod is rear 17" racestar darkstars and 305 MT ETRs
fuel pump 80-85%
Injectors 78-81%
fuel pressure 105psi
15.2 psi peak 15psi average
200-500DA
Ran a best of 10.399@132.98mph this day.
Needs a tune to run the 3.17
@Hpindy has all the data. He can better answer any questions.

 

[TeamDemon]

Hpindy Data logged my Redeye 100% stock only mod is rear 17" racestar darkstars and 305 MT ETRs
fuel pump 80-85%
Injectors 78-81%
fuel pressure 105psi
15.2 psi peak 15psi average
200-500DA
Ran a best of 10.399@132.98mph this day.
Needs a tune to run the 3.17
@Hpindy has all the data. He can better answer any questions.

No body has one of these on their car with no tune and some logs?

I do, for my Demon and my Hellcat

 

[Frenchcat]

I do, for my Demon and my Hellcat

If I understand well @TeamDemon, you have the 3.17 on both , your Demon and your Hellcat and this, without a tune?

 

[Hpindy]

Hpindy Data logged my Redeye 100% stock only mod is rear 17" racestar darkstars and 305 MT ETRs
fuel pump 80-85%
Injectors 78-81%
fuel pressure 105psi
15.2 psi peak 15psi average
200-500DA
Ran a best of 10.399@132.98mph this day.
Needs a tune to run the 3.17
@Hpindy has all the data. He can better answer any questions.

I'm going to fire my $.02 in .
I'm a very conservative person so 80% duty cycle on the injectors and pump(s) is the max for me . Some people will run 90% + and get away with it but it's not worth risk to me .
The plug and play BAP like hellno has might be the ticket to making this pulley work on a stock tune . I have been talking with him and looking at his logs and it Is working rather well for supplying fuel .

Sent from my BBF100-2 using Tapatalk

 

[Magnified]

Team, you have that on the stock hellcat without a tune?

 

[TeamDemon]

If I understand well @TeamDemon, you have the 3.17 on both , your Demon and your Hellcat and this, without a tune?

Yes

 

[TeamDemon]

Team, you have that on the stock hellcat without a tune?

Yes

 

[NYCSRTATE]

I want this litens 3.17 also but I would like to see more logs, my concern as with others is the injectors maxing out at low DA due to the higher boost.

Like hpindy said I really don't want to see anything near 90% on them

I can wait for logging and testing and if they show some relatively safe numbers im all in on this 3.17

Fingers crossed!

 

[hellno]

I want this litens 3.17 also but I would like to see more logs, my concern as with others is the injectors maxing out at low DA due to the higher boost.

Like hpindy said I really don't want to see anything near 90% on them

I can wait for logging and testing and if they show some relatively safe numbers im all in on this 3.17

Fingers crossed!

Add a bap and make your existing injectors work

 

[NYCSRTATE]

Add a bap and make your existing injectors work

I would like to stay as stock as possible, I know it sounds silly wanting to add boost and stay as close to stock as possible.

If I start with the bap I might as well just do the 2.72 new injectors, tune etc and obliterate my warranty.

I want my cake and eat it to! 🤣🤣🤣

Damn you Litens!!

 

[hellno]

Once you

I would like to stay as stock as possible, I know it sounds silly wanting to add boost and stay as close to stock as possible.

If I start with the bap I might as well just do the 2.72 new injectors, tune etc and obliterate my warranty.

I want my cake and eat it to! 🤣🤣🤣

Damn you Litens!!

do a mod and go faster you will only want more

 

[NYCSRTATE]

Once you

do a mod and go faster you will only want more

Trust me I know, it's why I held out so far and this long.

My 2010 CSRT was built $9k later I wanted more.

 

[Scott]

Add a bap and make your existing injectors work

If it wasn't so damn expensive, I'd throw it on my new Redeye with my old boostapump and let it eat my315x15" MT pros, not thinking twice about it.